Table of Contents
Advertisement
22
Installing Workflow 7.0
Downloading the Workflow installer through the Symantec Management Console
Downloading the Workflow installer through the
Symantec Management Console
To install Workflow 7.0 through the Symantec Installation Manager
1
In the Symantec Installation Manager, click Install new products.
Navigate to the Symantec Installation Manager by clicking Start > Programs
> Altiris > Symantec Installation Manager.
Make sure you are using the correct XML file in Symantec Installation
Manager settings. You should use
http://www.solutionsam.com/solutions/pl/symantec.pl.xml.
2
Set the filter to None.
Symantec Workflow Solution 7.0 appears when you set the filter to None.
3
Click the Symantec Workflow Solution 7.0 check box, and then click Review
selected products.
Depending on what you have already installed, you may need to install other
prerequisites. The Symantec Installation Manager alerts you if you need to
install prerequisites.
4
Click Next.
5
Complete the installation wizard.
Let the Workflow download finish before you start the installation.
6
(Optional) migrate links from Notification Server.
Select this option if you want to migrate links to your old item actions, dialog
workflows, and tasks from Notification Server 6.5 to the Symantec
Management Console.
See
Migrating links from Notification Server 6.5 to Symantec Management
Platform 7.0"
on page 35.
See
About installing Workflow 7.0"
Once you have installed Workflow Solution in the Symantec Installation Manager,
you can download the Workflow 7.0 installation file through the Symantec
Management Console. You need to download the installer before you can install
Workflow.
See
Installing Workflow for the first time"
on page 13.
on page 14.
Advertisement
Table of Contents
