Configuration Node: Intel Remote Access Policy Page; Controllers And Ports Node - Symantec ALTIRIS REAL-TIME SYSTEM MANAGER 7.0 SP2 - V1.0 Manual

Configuration node: Intel Remote Access Policy page

Controllers and Ports node

See "Configuring the Intel AMT device settings "
(Intel AMT 4.0 and later only)
This page is available only if Real-Time System Manager detects that the target
computer is configured to use Intel AMT.
This page lets you view the Client Initiated Remote Access (CIRA) policies which
the client computer is configured to use. If there is an active session, this page
lets you close the session.
For more information on configuring remote access policies, see the Out of Band
Management Component Implementation Guide.
Options on the Configuration node: Intel Remote Access Policy
Table 5-2
Option Description
Close session This option is enabled when there is an active remote access session on
the target computer.
This option ends the session.
This node lets you view controller and port information.
Pages under the Controllers and Ports node
Table 5-3
Page Description
IDE Controller Displays IDE controller information.
Parallel Port Displays parallel port information.
SCSI Controller Displays SCSI controller information.
Serial Port Displays serial port information.
USB Controller Displays USB controller information.
USB Hub Displays USB hub information.
About Real-Time System Manager pages

Configuration node: Intel Remote Access Policy page

on page 40.
49