Turning Off, Turning On, Or Restarting A Computer - Symantec ALTIRIS REAL-TIME SYSTEM MANAGER 7.0 SP2 - V1.0 Manual

Turning off, turning on, or restarting a computer

To open the Real-Time view from the Real-Time System Manager resolution tools
1 In the Symantec Management Console, on the Actions menu, click Remote
Management > Real-Time Management.
2 On the Manage page, type the host name or the IP of the computer you want
to connect to, and then click Connect.
3 In the Resource Manager, view the real-time information about the computer.
See "About the Real-Time Home page"
About the Real-Time Home page
The Real-Time Home page is the first page in the Resource Manager's Real-Time
view tree. It displays the connection information for the computer. This page
displays the list of protocols that the target computer supports, and if the target
computer accepts the connection credentials that you provided. The protocols
include WMI, ASF, DASH, Intel AMT, IPMI, and SNMP. Only the protocols that
are turned on in the connection profile are displayed.
If credentials are displayed as invalid, verify that your connection profile is
configured to use the correct credentials.
Under Supported protocols, you can select, add, or modify the connection profile
that you want to use when connecting to the target computer.
For more information, view topics about connection profiles in the Symantec
Management Platform Help.
See "Troubleshooting connection through the Real-Time view"
Note: The availability of power commands depends on the current power state
and the technologies (WMI, ASF, Intel AMT, DASH, IPMI) that are available on
the target computer. For example, WMI power management is limited to Reboot
and Power off commands and can be performed on a computer with a running
operating system. This limitation is because WMI is an in-band functionality.
For computers with Intel Active Management Technology (Intel AMT), you can
configure the Redirection options before restarting or turning on the computer.
See "Starting a remote control session "
See "Booting a computer from another device "
Using Real-Time System Manager
Running real-time one-to-one tasks
on page 33.
on page 34.
on page 35.
33
on page 61.