Configuration Node: Intel Amt Configuration Mode Page; Configuration Node: Intel Amt Settings Page - Symantec ALTIRIS REAL-TIME SYSTEM MANAGER 7.0 SP2 - V1.0 Manual

48 About Real-Time System Manager pages

Configuration node: Intel AMT Configuration mode page

Configuration node: Intel AMT Configuration mode
page

Configuration node: Intel AMT Settings page

Operating System node
Physical System node
Altiris Agent node
Manage Virtual Layers page
Summary page
Network Filters page
(Intel AMT only)
This page is available only if Real-Time System Manager detects that the target
computer is configured to use Intel AMT.
The page lets you unconfigure the Intel AMT device on the client computer.
Options on the Configuration node: Intel AMT Configuration mode
Table 5-1
page
Option Description
Partial Removes all Intel AMT settings except for administrative user credentials and
PID-PPS pairs. After partial unconfiguration is complete, the Intel AMT client
computer starts sending configuration requests to the setup and configuration
server (Intel SCS). The computer is not available for management through the
Intel AMT interface until it is configured again by Intel SCS.
For more information on the Intel AMT initialization, setup, and configuration,
see the Out of Band Management Component Implementation Guide.
Full Removes all settings from the Intel AMT device. You must initialize, set up, and
configure the device again.
If you click this option, you can also select a Small Business or Enterprise
configuration model to set after unconfiguration is complete.
For details on Intel AMT initialization, setup, and configuration, see the Out of
Band Management Component Implementation Guide.
(Intel AMT only)