Accessing The Real-Time View - Symantec ALTIRIS REAL-TIME SYSTEM MANAGER 7.0 SP2 - V1.0 Manual

32 Using Real-Time System Manager
Running real-time one-to-one tasks

Accessing the Real-Time view

See "Configuring alerts "
Configure the Intel AMT device settings.
See "Configuring the Intel AMT device settings "
View the Intel AMT log that is stored in the NVRAM of the target computer.
See "Viewing Intel AMT log "
The Real-Time view is located in the Resource Manager.
You can open the Resource Manager in the following ways:
From a computer filter or a report
Use this method for the managed computers that are registered with
Notification Server.
See "To open the Real-Time view from computer filters or reports"
From the Real-Time System Manager resolution tools
Use this method for the unmanaged computers that do not have the Altiris
Agent installed.
See "To open the Real-Time view from the Real-Time System Manager
resolution tools" on page 33.
To open the Real-Time view from computer filters or reports
1
In the Symantec Management Console, select the computer that you want to
manage from the list of discovered resources, any computer filter, or a report.
For example, you can do one of the following:
In the Symantec Management Console, on the Manage menu, click Filters.
In the left pane, click Computer Filters > All Computers. In the right
pane, click the computer that you want to manage.
Discover computers and click View discovery reports to view the list of
discovered computers. In the report, click the computer that you want to
manage.
See "Discovering computers"
2
Right-click the selected computer and click Resource Manager.
3 In the Resource Manager, on the View menu, click Real-Time.
4 In the tree view pane, click Real-Time Consoles.
See "About the Real-Time Home page"
on page 38.
on page 40.
on page 26.
on page 33.
on page 40.
on page 32.