What You Can Do With Real-Time System Manager - Symantec ALTIRIS REAL-TIME SYSTEM MANAGER 7.0 SP2 - V1.0 Manual

What you can do with Real-Time System Manager

Real-Time System Manager nodes in the Real-Time view (continued)
Table 1-1
Node
Software
Summary
Depending on the computer you connect to, you can experience the following
behavior of the Real-Time view:
If an item is disabled, then the corresponding WMI class is not supported on
the connected computer.
If the WMI class is supported, but there is no instance of it on the computer,
then it is displayed as "No instances found."
If Intel AMT, ASF, DASH, or IPMI technologies are detected on the target
computer, additional nodes appear in the tree.
The information that is available in the Real-Time System Manager section
includes only a subset of the WMI data. However, you can customize the data that
can be accessed. Contact Symantec Technical Support if you want to create your
own views on the WMI data.
From the Real-Time view, you can perform a variety of one-to-one tasks, such as
the following tasks:
View the target computer's software and hardware information.
Start and stop processes and services.
View the printer's configuration and manage print jobs.
Turn off and restart the target computer.
Turn on the target computer. An out-of-band capable computer, which is
properly configured, is required to use this feature. Use Altiris Out of Band
Management Component to configure computers for out-of-band management.
View the Altiris Agent configuration information and logs, send basic inventory,
request configuration, and change the Notification Server computer to which
the Altiris Agent is assigned.
Enable and disable Software Virtualization Layers. This feature requires
installed Symantec Workspace Virtualization Agent.
See "About the Real-Time view"
Introducing Real-Time System Manager
What you can do with Real-Time System Manager
Description
This node contains software information.
This page displays the target computer's summary.
on page 16.
17