Table of Contents
Advertisement
TL-WA7510N
2. Enter or select the path name where you save the downloaded file on the computer into the
File Name blank.
3. Click the Upgrade button.
4. The Device will reboot while the upgrading has been finished.
Note:
1.
The firmware version must correspond to the hardware.
2.
The upgrade process takes a few moments and the Device restarts automatically when the
upgrade is complete.
3.
It is important to keep power applied during the entire process. Loss of power during the
upgrade could damage the Device.
4.9.6 Factory Defaults
Selecting System Tools > Factory Default allows you to restore the factory default settings for
the device on the screen shown in Figure 4-41.
Click the Restore button to reset a
Default User Name - admin.
Default Password - admin.
Default IP Address - 192.168.1.254.
Default Subnet Mask - 255.255.255.0.
Note:
All changed settings will be lost when defaults are restored.
5GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 4-41 Restore Factory Defaults
ll configuration settings to their default values.
71
Hide quick links:
Advertisement
Table of Contents
