TP-Link TL-WA7510N User Manual page 88

TL-WA7510N
Note:
To build a successful connection by QSS, you should also do the corresponding configuration on a
wireless adapter for QSS function meanwhile.
For the configuration of the new device, here takes the Wireless Adapter of our company for
example.
I. By PBC
Step 1: Keep the default QSS Status as Enabled and click the Add device button in Figure 5-5,
and then the following screen will appear.
Step 2: Choose "Press the button of the new device in two minutes" and click Connect.
Step 3: Configure the wireless adapter for QSS function by choosing "Push the button on my
access point" in the QSS configuration utility as below, and then click Next.
5GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 5-6 Add A New Device
80