Alarm Sending - TP-Link TL-SC4171G User Manual

Passive mode: Set whether you use the passive mode of FTP server or not when connecting to
FTP server. Select On to connect to FTP server using the passive mode.

8.4.2 Alarm Sending

Set to forward the image file to the specified FTP server linked with the alarm detection by the built-in
motion detection function. Select On to send the image file to FTP server linked with the alarm detection.
Remote Path: Type the path to the destination in FTP server up to 64 characters.
Image File Name: Type the file name you want to assign to the images when sending to the FTP
server. You can use up to 10 alphanumeric characters, - (hyphen) and _ (underscore) for naming.
Suffix: Select a suffix to add to the file name
Date & time: The date & time suffix is added to the Image file name. The date/time suffix
consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits), hour (2 digits),
minute (2 digits), second (2 digits), and consecutive number (2 digits), thus 14-digit number is
added to the file name.
Sequence number: A consecutive number of 10 digits between 0000000001 and 4294967295
and two fixed digits 00 are added to the Image file name.
Sequence number clear: Click Clear and the suffix of the sequence number returns to 1.
Alarm
Motion Detection: Click it on for using Motion Detection function as a sensor. You can set
motion detection function at the motion detection function page.
57