Alarm Sending - TP-Link TL-SC3430 User Manual

FTP Server Name: Type the FTP server name to upload still images up to 64 characters, or the
IP address of the FTP server.
User Name: Type the user name for the FTP server.
Password: Type the password for the FTP server.
Retype Password: To confirm the password, type the same characters as you typed in the
Password box.
Passive Mmode: Set whether you use the passive mode of FTP server or not when connecting
to FTP server. Select On to connect to FTP server using the passive mode.
Attached File Type: You can choose snapshot or video clip for alarm sending. Select
"Snapshot," one snapshot will be transmitted to the specified FTP server while motion detection
/ audio detection triggered. Select "Video clip," one 5-seconds video clip will be transmitted.
Test: After setting the FTP server information, you can tick the test key to test if the connection
between IP CAM and FTP server works.

8.1.2 Alarm Sending

Set to forward a snapshot or video clip file to the specified FTP server linked with the alarm detection by
the external sensor input or by the built-in motion detection function. Select On to send the file to FTP
server linked with the alarm detection.
57