TP-Link TL-SC4171G User Manual page 66

Note:
If you use g-mail as your mail server, you should set 587 as your port number and tick SSL box.
Authentication:
Off: No authentication is necessary when an email is sent.
On: Authentication is necessary when an e-mail is sent. To set the authentication, please select
one from SMTP and POP before SMTP.
SMTP: Select it if SMTP authentication is necessary when an e-mail is sent.
POP before SMTP: Select it if POP before SMTP authentication is necessary when an e-mail is
sent.
Note:
When authentication is set to On, be sure to select either SMTP or POP before SMTP, or both of
them.
POP server name: It is necessary when the POP before SMTP is selected in Authentication.
Type the POP (receiving mail) server name up to 64 characters, or type the IP address of the
POP server. This setting is necessary when the SMTP server which sends e-mails performs
authentication using the POP user account.
User name, Password: Type the User name and Password of the user's mail account. This
setting is necessary when the SMTP server which sends e-mails performs authentication.
Recipient e-mail address: Type the recipient e-Mail address up to 64 characters. You can specify
up to three recipient E-mail addresses.
Administrator e-mail address: Type the Administrator e-Mail address up to 64 characters. This
address is used for reply mail and sending system messages from the SMTP server.
Subject: Type the subject/title of the e-Mail up to 64 characters. With respect to mail which is sent
according to the alarm detection when Alarm sending of the alarm tab is set to On, the characters
standing for the sensor type added to the subject.
Message: Type the text of the E-mail up to 384 characters. (A line break is equivalent to 2
characters.)
61