Date/Time - TP-Link TL-SC4171G User Manual

7.1.2 Date/Time

The Date/ Time page displays all options of time setting.
Current date / time: This displays the current date and time of this IP Camera.
PC clock: This displays the date and time of the monitoring PC clock.
Date / Time format: You can click the pull down box to select different time display formats.
Adjust: You can select one of those four adjusting modes for your IP Camera.
Keep current setting: Select this mode to keep the current date and time of this IP Camera.
Synchronize with PC: Select this mode to keep the date and time of this IP Camera is the
same as the monitoring PC.
Manual setting: Select this mode to adjust manually the date and time of this IP Camera.
Synchronize with NTP: Specify the NTP server name and the Refresh Interval to synchronize
the date and time of this IP Camera with those of the time server, known as the NTP server.
Time Zone: You can select the Time Zone of the format from Greenwich Mean Time. The time will
display the same as the current date / time option.
Daylight Saving Time: There are two modes to choose for setting up daylight saving time.
By Date: Set the start and end time by select month, day, hour, and minute.
By Week Number: Set the start and end time by select month, week, hour, and minute.
Note:
The NTP server (Network Time Protocol) is the time server which is an Internet standard protocol built on
the top of TCP/IP. This assures accurate synchronization to the millisecond of computer clock times in a
network of computers.
29