TP-Link TL-SC3000 User Manual
  1. Manuals
  2. Brands
  3. TP-Link Manuals
  4. Security Camera
  5. TL-SC3000
  6. User manual

TP-Link TL-SC3000 User Manual

3gpp surveillance camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

TL-SC3000
3GPP Surveillance Camera
Rev:1.0.0
1910010104

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TL-SC3000 and is the answer not in the manual?

Questions and answers

Related Manuals for TP-Link TL-SC3000

Summary of Contents for TP-Link TL-SC3000

  • Page 1 TL-SC3000 3GPP Surveillance Camera Rev:1.0.0 1910010104...
  • Page 2 No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2008 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved.
  • Page 3 FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 4: Table Of Contents

    CONTENTS Package Contents ..........................1 Chapter 1. Product Overview ......................2 Description ........................2 Features...........................2 Specifications .........................3 Chapter 2. Hardware Overview......................4 Rear Panel ........................4 Upper Side & Underside ....................5 Chapter 3. Installation ........................5 Install the Hardware ......................5 Assign an IP address and Access the Camera ..............9 Chapter 4.
  • Page 5 Checklist before using....................47 Installation and Setup ....................47 8.2.1 Software download ....................47 8.2.2 GPRS / 3G Mobile Phone ..................48 8.2.3 PDA ........................49 Available Functions......................51 8.3.1 GPRS / 3G Mobile Phone ..................51 8.3.2 PDA ........................51 Appendix 1 Recording Time Table....................53 Appendix 2 User Level For Remote Operation ................55 Appendix 3 Default Value ........................55...

  • Page 6: Package Contents

    TL-SC3000 3GPP Surveillance Camera Package Contents The following items should be found in your package: One TL-SC3000 3GPP Surveillance Camera One Adapter and power cord One Bracket One RJ45 network cable Quick Installation Guide One Resource CD , including: This User Guide...

  • Page 7: Chapter 1. Product Overview

    TL-SC3000 3GPP Surveillance Camera Chapter 1. Product Overview 1.1 Description This camera series is a network-based digital surveillance device with a built-in web server for the purpose of remote monitoring and recording. It supports TCP/IP networking for live video transmission in the format of H.264, MPEG4 or MJPEG, and you can easily operate the camera via the web browser or...

  • Page 8: Specifications

    TL-SC3000 3GPP Surveillance Camera 1.3 Specifications* SPECIFICATIONS TL-SC3000 Network LAN Port LAN Speed 10/100 Based-T Ethernet DDNS, PPPoE, DHCP, NTP, SNTP, TCP/IP, Supported Protocols ICMP, SMTP, FTP, HTTP, RTP, RTSP Frame Rate NTSC:30fps, PAL:25fps Number of Online Users Security Multiple user access levels with password...

  • Page 9: Chapter 2. Hardware Overview

    TL-SC3000 3GPP Surveillance Camera Dimensions: 152.5 (L) x 115.2 (W) x 40.2 (H) mm Chapter 2. Hardware Overview 2.1 Rear Panel CONNECTOR / BUTTON DESCRIPTION Reset Default This button is hidden in the pinhole. Press and hold the reset button until the network camera reboots. This will reset all parameters, including the IP address to factory default settings.

  • Page 10: Upper Side & Underside

    TL-SC3000 3GPP Surveillance Camera 2.2 Upper Side & Underside Chapter 3. Installation 3.1 Install the Hardware This camera can be installed in two ways: ceiling-mounted and desktop. During the installation, please make sure the upper side of the camera is always facing up, as shown in Figure 1 below, regardless of which installation way you’re using.
  • Page 11 TL-SC3000 3GPP Surveillance Camera Figure 3-1 Parts needed for camera installation Fix the base of the bracket. Fix the base of the bracket with the supplied 3 screws to the place you want to install by using a power drill.
  • Page 12 TL-SC3000 3GPP Surveillance Camera Figure 3-3 Connect the stem to the base Figure 3-4 Connect the joint lock to the stem Connect the camera to the bracket. Ceiling-mounted: With the upper side of the camera facing up, align the mounting screw hole on the upper side with the screw thread of the joint lock, and rotate the camera to secure, as shown in Figure 3-5.
  • Page 13 TL-SC3000 3GPP Surveillance Camera Figure 3-5 Connect the camera to the bracket Insert the cap to the other mounting screw hole of the camera. Ceiling-mounted: Insert the cap to the mounting screw hole on the underside of the camera, as shown in Figure 3-6.

  • Page 14: Assign An Ip Address And Access The Camera

    TL-SC3000 3GPP Surveillance Camera Figure 3-7 Finish the installation 3.2 Assign an IP address and Access the Camera Step 1. Install the Software Place the supplied Video Viewer AP software CD into your DVD- / CD-ROM drive. The installation process will automatically start. Follow the on-screen instructions to install the application programs.
  • Page 15 TL-SC3000 3GPP Surveillance Camera the “Address Book” panel will be displayed on the right side of the Video Viewer control panel. b) The default network camera settings are as follows: Item Default Setting IP Address 192.168.1.10 User Name admin Password...

  • Page 16: Chapter 4. Video Viewer Basic Operation

    TL-SC3000 3GPP Surveillance Camera Chapter 4. Video Viewer Basic Operation 4.1 The Live View Page After setting up the network information, login user name and password, double-click “ ” on the PC desktop to open and log into the Video Viewer control panel. You will see a screen similar to the following with 6 major sections: Connect to multiple network cameras (e.g.

  • Page 17: Address Book

    TL-SC3000 3GPP Surveillance Camera Click to show the predefined IP address(es). You can Address Book add, remove or search the IP address to log in the ② network camera remotely. Click to show the main operation functions: audio Miscellaneous volume control, color setting, backup, record setting, ③...

  • Page 18: Manual Record

    TL-SC3000 3GPP Surveillance Camera Button Function Description Click to directly add one IP address for login. Key in all the network camera access information needed, and click “Apply” and “Close” to add the selected address to the address book. Select one current IP address from the address list, and click this Edit button to edit the settings.
  • Page 19 TL-SC3000 3GPP Surveillance Camera page. Check the record type “Manual”, and assign the location to save the recordings by double-clicking the “Video Path” cell. Start manual recording Once the “Manual” checkbox is checked in the “Record On/Off” section, check the “REC” box in the address book panel “...

  • Page 20: Playback

    TL-SC3000 3GPP Surveillance Camera 4.4 Playback To play a recording, click “ ” (Miscellaneous Control) → “ ” (Status List), and select the “Record” tab. A list of all the recordings will be shown by defaults, and you can also sort out the logs you want to speed up the search time.

  • Page 21: Snapshot

    TL-SC3000 3GPP Surveillance Camera 4.5 Snapshot To take a snapshot of the current view, click “ ” (Snapshot) on the main control panel. Once the current view is captured, you’ll see an icon “ ” shown at the bottom right corner of the image display view.

  • Page 22: Information

    TL-SC3000 3GPP Surveillance Camera 4.6 Information Click this button “ ” to show the current network connection details: 1) IP Address 7) Resolution 2) Transfer Type 8) Quality 3) Stream Format 9) Server Time 4) AV Option 10) Online Users...

  • Page 23: Chapter 5. Video Viewer Miscellaneous Control Panel

    TL-SC3000 3GPP Surveillance Camera Chapter 5. Video Viewer Miscellaneous Control Panel Click “ ” (Miscellaneous Control) on the Video Viewer control panel, and 7 functions are available as follows:...

  • Page 24: Color Setting

    TL-SC3000 3GPP Surveillance Camera Click the button to show the current version of the Video Viewer. Button Function Description This volume adjustment button would be enabled in our other models which support 2-way audio Click this button to adjust the brightness /...

  • Page 25: Backup (For Dvr Only)

    TL-SC3000 3GPP Surveillance Camera Click “ ” (Set) to apply the change to the selected network camera. Click “ ” (Default) and click “ ” (Set) to return to the default color settings. Note: You need to be a supervisor to operate this function. For details, please see “Account” on Page 25.

  • Page 26: Record Setting

    TL-SC3000 3GPP Surveillance Camera NO. Function Description Select the IP address of the desired network camera from IP Address / Port / User Name / the drop-down list and check if the network information is Password correct. Specify the hard disk (HDD Number) and channel number HDD Number / Channel (Channel) within which have the video data you need.
  • Page 27 TL-SC3000 3GPP Surveillance Camera Note: Once all the record settings are finished, please check the “REC” checkbox in the address book panel “ ” to start manual recording. Please refer to “Address Book” on Page 12. Record On/Off In this section, you can select which type of the recording will be enabled. There are 4 options: Manual / Schedule / Motion / Alarm.
  • Page 28 TL-SC3000 3GPP Surveillance Camera Tip: To set schedule record, alarm record and motion record all at once for the whole week, press “＋” button. To clear all record time settings, press “－“ button. Custom To specify the more specific time for recording, click “Custom”.

  • Page 29: Server Setting

    TL-SC3000 3GPP Surveillance Camera Record Path Select and view the location for saving the recorded video and snapshot pictures. To change the saving path for the recorded video clips or snapshots, check the drive you want, click the cell of “Video Path” or “Picture Path” twice, and select a new path for saving the video clips or snapshots.
  • Page 30 TL-SC3000 3GPP Surveillance Camera Item Description Firmware Version Display the current firmware version of the network camera. MAC Address Display the MAC address of the network camera. Title Provide a title for the network camera. Only 15 characters are allowed. The default camera title is “Camera1”.
  • Page 31 TL-SC3000 3GPP Surveillance Camera To modify an existing account, select the account you want, change the setting, and click “Apply”. ‧ To remove an existing account, select the account you want, and click “Delete”. ‧ To save your changes, click “Apply”.
  • Page 32 TL-SC3000 3GPP Surveillance Camera Online User Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “General” → “OnLineUser”, and you can check all the online user information. To update the user information, click “Refresh”. Trigger Click “ ” (Miscellaneous Control) → “...
  • Page 33 TL-SC3000 3GPP Surveillance Camera Function Description Sensitivity Set the detection sensitivity: 0 ~ 9，the higher the number, the lower the sensitivity. Motion Detection Set the motion detection area by selecting the area grids with your mouse. Pink Setting Area grids represent the area that is not being detected while the transparent grids are the area under detection.

  • Page 34: Network

    TL-SC3000 3GPP Surveillance Camera Note: If your network camera & mail server are not connected by LAN, and the network connection is not stable or failed, the notification method by Email or FTP might be failed. Sometimes the length of the video clip emailed or uploaded might not be the same as the one you specified in “Total Time”.
  • Page 35 TL-SC3000 3GPP Surveillance Camera Function Description DHCP This DHCP function needs to be supported by a router or cable modem network with the DHCP service. Choose the “DHCP” IP type, and select “Network” → “DDNS” to set DDNS settings. For detailed DDNS settings, please refer to “DDNS” section.
  • Page 36 TL-SC3000 3GPP Surveillance Camera Sign up Enter all the information necessary for signing up an account according to the website instructions. tplinkipcam 1. Key in a user name for login. This name is not equal to the domain name. 2. Key in your E-mail address and input it again to confirm.
  • Page 37 TL-SC3000 3GPP Surveillance Camera 4. Click “Create Account”. Then, you will see the screen “Account Created”, and Dyndns will email the instructions to your specified E-mail address. Please read this email within 48 hours and complete the procedure to activate your account according to the instructions in the email.
  • Page 38 TL-SC3000 3GPP Surveillance Camera tplinkipcam tplinkipcam 1. Input a meaningful 2. Choose a host name domain...
  • Page 39 TL-SC3000 3GPP Surveillance Camera SNTP SNTP (Simple Network Time Protocol) is for time setting. Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “Network” → “SNTP” to go into the “SNTP” page. Function Description GMT (Greenwich Mean Once users choose the time zone, the network camera will adjust the local Time) area time of the system automatically.

  • Page 40: Video

    TL-SC3000 3GPP Surveillance Camera Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “Network” → “MAIL” to go into the “MAIL” page. Enter the detailed E-mail information and press “Apply” to confirm. The information you set here will be applied when the function of E-mail notification is enabled in the "Trigger" menu.

  • Page 41: Tools

    TL-SC3000 3GPP Surveillance Camera Item Description JPEG Choose the image size (VGA / QVGA) and picture quality (BEST / HIGH / NORMAL / BASIC) when the web transmission format is JPEG. MPEG Choose the image size (VGA / QVGA) and picture quality (BEST / HIGH / NORMAL / BASIC) when the web transmission format is MPEG.

  • Page 42: Language Selection

    TL-SC3000 3GPP Surveillance Camera Function Description Update Server Select the IP address of the network camera. Make sure the network settings of the selected network camera are correct. Current Version In the “Firmware” section, you will see the current firmware version.

  • Page 43: Status List

    TL-SC3000 3GPP Surveillance Camera Note: The default language depends on the operation system of your PC. If the language of your operation system is not supported by this software, English will be the default language. 5.6 Status List Click “...
  • Page 44 TL-SC3000 3GPP Surveillance Camera Button / Function Description Range Unit Set different time range unit (One Day / One Week) of the event logs. Date Selection (From / To) Choose the specific date range including the event / record logs you might want.

  • Page 45: Event

    TL-SC3000 3GPP Surveillance Camera 5.6.2 Event Select “Event” to search for the specific event log(s) by date. Button / Function Description Range Unit Set different time range unit (One Day / One Week) of the event logs. Date Selection (From / To) Choose the specific date range including the event / record logs you might want.

  • Page 46: Playback Screen

    TL-SC3000 3GPP Surveillance Camera Button / Function Description Range Unit Set different time range unit (One Day / One Week) of the event logs. Date Selection (From / To) Choose the specific date range including the event / record logs you might want.

  • Page 47: Chapter 6. Ie Web Browser

    TL-SC3000 3GPP Surveillance Camera Function Description Playback / Download This area shows the detailed playback / download information, such as the file Info Display name, record date and time, and the speed, etc. Playback Progress Bar This area shows the playback progress and the progress percentage.

  • Page 48: Toolbar Display On The Ie Web Browser

    TL-SC3000 3GPP Surveillance Camera Note: The supported PC operation systems are Windows 2000 and Windows XP. Step 1: Key in the IP address used by your network camera in the URL address box, such as “http://ipcam.dyndns.org”, and press Enter. You will be prompted to enter the user name and password to access the network camera.
  • Page 49 TL-SC3000 3GPP Surveillance Camera Function Description Choose the audio function: On or Off. Audio On / Audio Off (This audio function is only for AVI202 and AVI212 model) In the “Network” page, you can set the network Static IP / DHCP / configuration of the network camera.

  • Page 50: Chapter 7. Quicktime Player

    TL-SC3000 3GPP Surveillance Camera Function Description In the “Log” page, you can see all the logs for the network camera, such “POWER ON”, “REMOTE LOGIN”, “RESET DEFAULT”, “EMAIL”, “FTP”, “DDNS”, “PPPOE”, “DHCP” and “SNTP UPDATE”…etc. For details, please refer to “Log”...
  • Page 51 TL-SC3000 3GPP Surveillance Camera Step 3: A pop-up window will appear and prompt you to enter the authentication information. Key in the user name and password for accessing your network camera. The user name and password are the same as the ones you use to log into the Video Viewer.

  • Page 52: Chapter 8. Monitoring Via Mobile Device

    TL-SC3000 3GPP Surveillance Camera Monitoring via Mobile Device Chapter 8. 8.1 Checklist before using Make sure your PDA or mobile phones conform to the following requirements: Device Make sure … The OS is based on WinCE. J2ME MIDP2.0 is supported.

  • Page 53: Gprs / 3G Mobile Phone

    Please ignore EagleEyes (J2ME). This one is outdated and not suitable for remote surveillance now. STEP2: Select the application you need and start downloading. For TL-SC3000 user, please download EagleEyes(J2ME newVersion) for your GPRS/3G Mobile Phone while EagleEyes(For WinCE New Version) for PDA.

  • Page 54: Pda

    TL-SC3000 3GPP Surveillance Camera 1. Host Name Give a name for this connection set. 2. User Name Enter the user name used to access the device you want to connect. 3. Password Enter the password used to access the device you want to connect.
  • Page 55 TL-SC3000 3GPP Surveillance Camera With EagleEyes (For WinCE New version) installed STEP1: Go to “Programs” “EagleEyes” to go to the setting page. STEP2: Click “NEW DEVICE” to add a connection set, and key in the information necessary for DVR or network camera remote access.

  • Page 56: Available Functions

    TL-SC3000 3GPP Surveillance Camera 8.3 Available Functions When the installation is completed, you can start the remote surveillance via your device now. The functions available are depending on the remote device you have, and the software you installed. For details, please refer to the following sections.
  • Page 57 TL-SC3000 3GPP Surveillance Camera DVR Mode PTZ Mode...

  • Page 58: Appendix 1 Recording Time Table

    TL-SC3000 3GPP Surveillance Camera Appendix 1 Recording Time Table The following table lists the recording time table for TL-SC3000 and takes PAL video system image capture as an example. The compression format for TL-SC3000 is MPEG4 Table 1: static state...
  • Page 59 TL-SC3000 3GPP Surveillance Camera 1/15 66.6 full 140.6 Normal 111.6 1/10 1/15 55.4 full 91.8 Basic 80.6 83.6 1/10 49.4 1/15 36.2...

  • Page 60: Appendix 2 User Level For Remote Operation

    TL-SC3000 3GPP Surveillance Camera Appendix 2 User Level For Remote Operation ● For Video Viewer Supervisor Power User Normal User Guest Address Book ● ● ● ● Emap ● ● ● ● Miscellaneous Control Color Setting ● Backup Record Setting ●...

Table of Contents