Ftp Client; General - TP-Link TL-SC4171G User Manual

Tour Start: To click Tour Start, and then the camera will start the preset patrol tour.
Tour Stop: While the camera moves on patrol tour, click Tour Stop to stop the patrol tour.
Carry out the following steps:
1. Click Order and choose one of eight orders.
2. Click Select Pos. and choose one of the preset positions.
3. Fill in the Waiting time.
4. Click Set, and then the tour position is saved.
5. Follow the steps to set the other orders.
6. Click the OK to save the tour.

8.4 FTP Client

This menu is used for capturing and sending images to an FTP server. By using FTP client function, you
can send to FTP server the image file which has been shot and recorded linked with the built-in motion
detection function. Click the folder of FTP client to display the sub folders including General, Alarm
sending and Periodical sending.

8.4.1 General

Select "On" when you use FTP function. The FTP client setting page appears.
Select "Off", when you do not use the FTP client function.
Note:
The frame rate and operability on the main viewer may decrease while a file is being transmitted by the
FTP client function.
FTP server name: Type the FTP server name to upload still images up to 64 characters, or the IP
address of the FTP server.
User name: Type the user name for the FTP server.
Password: Type the password for the FTP server.
Re-type password: To confirm the password, type the same characters as you typed in the
Password box.
56