Http Event; General - TP-Link TL-SC4171G User Manual

Interval: Set the time interval of the periodical sending. Min value is 30 min and Max value is 24
hour.
Effective period: Set the period when the periodical sending is effective.
Always: The periodical sending is always effective.
Schedule: You can specify the period when the periodical sending is effective in the schedule
setting in the other section. Please check "Setting → Basic → Advance → Schedule →
Setting."
Note:
You can set schedule function at schedule page. (Please go to "Setting → Advanced → Schedule
→ Setting". For more details, please refer to Section 8.8.)

8.6 HTTP Event

HTTP Event is used for sending commands to an HTTP server. By using HTTP client function, you can
send the command defined by yourself, linked with the external sensor input or with the built-in motion
detection function to HTTP server. HTTP Event setting menu is composed of two tabs, General and
Alarm sending. Click the folder of HTTP Event to display the sub folders including General and Alarm
sending.

8.6.1 General

Select On, and you can start setting up the function.
HTTP Event: Set up the HTTP server URL, port, User ID, Password, and Proxy server settings.
For example:
URL: 192.168.1.7/cgi-bin/operator/ptzset
Note:
The setting of URL should be the same as CGI.
65