Configuring The Backup Storage Settings - KAPERSKY SECURITY 5.5 - FOR MICROSOFT EXCHANGE SERVER 2003 Administrator's Manual

Backup copying
2. Select the object you wish to delete in the table displaying the
content of the backup storage (see Figure 24). You can use filter
when searching for the object (see section 9.2, page 77).
3. Open the shortcut menu and use the Delete command or the
analogous command under the Action menu.
As a result of these actions, the object will be deleted from the backup storage
directory.
9.7. Configuring the backup storage
settings
The backup storage is created during installation of the Security Server
component. The settings of the backup storage are determined by default and
can be altered by the administrator.
In order to modify the backup storage parameters,
1. Select the Backup Storage folder in the console tree.
2. Open the shortcut menu and use the Properties command or the
analogous command under the Action menu.
3. In the Backup Storage Properties window that will open (see
Figure 27) select the required settings values.
In order to change the folder where the backup storage is located, type the path
to the new folder and the folder name in the Backup storage folder field or
specify the corresponding folder using the Browse button.
83