Scanning Of Routed E-Mail Traffic - KAPERSKY SECURITY 5.5 - FOR MICROSOFT EXCHANGE SERVER 2003 Administrator's Manual

56
You can restore the default settings by pressing the Restore the default
settings button.

6.4. Scanning of routed e-mail traffic

In order to reduce the load on the server in the traffic protection mode, we
recommend that mail traffic routed by the server, shall not be scanned.
In order to exclude mail routed to other servers from the scan scope,
1. In the main application window select the Kaspersky Security 5.5
for Microsoft Exchange Server 2003 node in the console tree,
open it, select the node corresponding to the server you need and
follow the
2. Go to the Protected Mail (see Figure 13) tab in the Anti-virus
protection window that will open.
3. Check the Do not scan routed mail box in the Routed mail group
of boxes (checked by default).
While enabling scanning of routed mail, please make sure that the anti-virus
protection for the Microsoft Exchange Server storage, containing the System
Attendant mailbox, is enabled. Otherwise traffic will not be scanned and all routed
mail will be blocked in the queue of Messages pending submission.
In addition, you are advised to restart Microsoft Internet Information Ser-
vices using the iisreset command after you enable scanning of routed mail.
You can restore the default settings by pressing the Restore the default
settings button.
Kaspersky Security 5.5 for Microsoft Exchange Server 2003
Anti-virus protection link in the results pane.