Server Protection Deployment - KAPERSKY SECURITY 5.5 - FOR MICROSOFT EXCHANGE SERVER 2003 Administrator's Manual

Operation of the application

2.2. Server protection deployment

In order to create the system of mail servers protection against mali-
cious programs and SPAM using Kaspersky Security 5.5 for Microsoft
Exchange Server 2003:
1. Install the Security Server component on all protected Exchange
servers. The installation shall be performed from the distribution kit
individually for each server.
2. Install the Management Console on a computer within the
corporate network. The Management Console provides a centralized
access to all network resources from a single administrator's
workstation; therefore, it can be installed on one computer only.
However, if several administrators are working together, the
Management Console can be installed to each administrator's
computer.
3. Create the list of managed servers (see section 4.3, page 30)
4. Connect the Management Console to the servers (see section 4.4,
page 31).
5. Configure the protection system for each server:
•
•
•
•
If the Management Console is not installed, the applica-
tion will function within the default limitations and using
the default settings (see section 4.6, page 33).
The server protection against malicious programs and
SPAM will be enabled automatically when Microsoft Ex-
change Server is started.
Configure the anti-virus database and content filtration
database updating settings (details see Chapter 5, page 38).
Verify the correctness of the settings and of the application's
operation
using a test "virus" EICAR (see section 4.7.1, page 35).
o
using a test message that contains spam attributes (see
o
section 4.7.2, page 36).
Configure the notification system that issues notifications about
events registered during the application's operation (see
Chapter 10, page 86)
Configure the event logs and reports (Chapter 12, page 100,
Chapter 13, page 111).
17