Connecting The Management Console To The Server - KAPERSKY SECURITY 5.5 - FOR MICROSOFT EXCHANGE SERVER 2003 Administrator's Manual

Starting using the application
or select the computer from the list using the Browse button.
In order to establish connection between the Management Console and
Kaspersky Security when adding the server, check the Connect now
box (details see section 4.4, page 31).
As a result, the server that you selected will be displayed as a <Server name>
node in the console tree. The local computer will be displayed as the <Server
name>(localhost). If the connection with the server was successfully
established, the node structure will include nested folders: Notification
templates, Backup storage, Report templates and Virus outbreak counters.
If the connection has not been established or could not be established you can
connect to such server manually (see section 4.4, page 31).
In order to remove a server from the list of managed servers,
select the node that corresponds to the server you wish to remove in the
console tree, open the shortcut menu and select the Remove the server
from the console tree command or use a similar item in the Action
menu.
As a result, the selected node will be removed from the console tree.
4.4. Connecting the Management
Console to the server
In order to be able to configure and manage Kaspersky Security 5.5 for Microsoft
Exchange Server 2003 using the Management Console, you have to connect to
the Security Server component installed on the server. The application will then
receive information from the server and display it as the console tree.
Later on, the Management Console will use this name to es-
tablish connection with the Security Server.
The connection is established using DCOM protocol.
The server you select must have the Security Server compo-
nent installed.
31