Scanning Attachments - KAPERSKY SECURITY 5.5 - FOR MICROSOFT EXCHANGE SERVER 2003 Administrator's Manual

Anti-virus protection
1. Disable the anti-virus mail protection using the Management
Console (see above).
2. Disable the anti-spam server protection using the Management
Console (see section 7.1, page 66).
3. Restart the Microsoft Exchange Information Store and IIS Admin
services.
4. Specify the Disabled startup type for the service of Kaspersky
Security 5.5 for Microsoft Exchange Server 2003.
In order to start the application after the automatic startup of the
Kaspersky Security 5.5 for Microsoft Exchange Server 2003 service has
been disabled, do the following:
1. Specify the Auto startup type for the service of Kaspersky Security
5.5 for Microsoft Exchange Server 2003.
2. Enable the anti-virus mail protection using the Management
Console (see above).
3. Enable the anti-spam server protection using the Management
Console (see section 7.1, page 66).

6.3. Scanning attachments

In order to decrease the load on the server when the anti-virus scan is
performed, you can limit the list of the objects to be scanned and put a restriction
on the time for scanning one object. These scan restrictions will be used both for
scanning the traffic and for the background storage scan.
It is to be noted that the body of the message will always be scanned as
the restrictions apply only to scanning the attachments.
In order to define objects that will not be scanned,
1. Select the node corresponding to the server you need in the
console tree and follow the
pane.
2. Go to the Attachment Scan tab in the Anti-virus protection (see
Figure 10) window that will open.
Anti-virus protection
53
link in the results