KAPERSKY SECURITY 5.5 - FOR MICROSOFT EXCHANGE SERVER 2003 Administrator's Manual page 113

Application's event logs
2. Go to the Diagnostics tab in the General settings window that will
open (see Figure 44).
The Diagnostics level for the system modules section located in the tab
contains a table. The left part of the table contains the list of all modules included
into the structure of the program. The right part of the table contains the list of
components included into the selected module and the diagnostics level for each
component.
Select the module in the left part of the table and then select the required
component in the right part of the table. Select the desired diagnostics level using
the diagnostics level drop-down list. Specify the required diagnostics levels for
each module.
After you are done with the settings press the Apply or the OK button.
You can restore the default settings by pressing the Restore the default
settings button.
Figure 44. The Diagnostics tab
113