Lcd-600 Controls And Display Description - DSC LCD-600 Instruction Manual

Liquid Crystal Display
(LCD) displays prompts and
system information on two 16
character lines.
If "< >" appears, it indicates
that more information is
available. Press either key to
view.
Keypad
Press keys as prompted by
the LCD display to view
alarms or troubles, to Arm/
Disarm the system or to
shunt zones.
To exit/return press [#].
To select function press [ ].
Important Note
Test system weekly, have
system trouble conditions
corrected by installer.
8
Press [<] to see the previous
function or item of information.
Press [>] to advance the
display to next function or
item of information.
Press the [F] Key for 2
seconds to send a Fire
transmission.
Press the [A] Key for 2
seconds to send an Auxiliary
transmission.
Press the [P] Key for 2
seconds to send a Panic
transmission.
Note: These keys will NOT
function unless programmed
by the installer. If these keys
are in service and the installer
has enabled audible feedback,
holding down the key for 2
seconds will cause the keypad
sounder to beep indicating
that the input has been
accepted and transmission is
underway.
9