Keypad Display Symbols - DSC PowerSeries PK5500 Installation Instructions Manual

[120]-[151] Command Output Labels
Default: "Command_O/ P_1" - "Command_O/P_4"
For Partition 1 Command O/P 1 to 4 enter [120] to [123]
For Partition 2 Command O/P 1 to 4 enter [124] to [127]
For Partition 3 Command O/P 1 to 4 enter [128] to [131]
For Partition 4 Command O/P 1 to 4 enter [132] to [135]
Cmd.
Section Part
Output
[120]-[151] 1to8 1to4
[201]-[264] Door Chime Sound Programming
You can program the keypad to make up to four different door chime sounds for individual zones.
ex. For Zone 1 enter section [201], for Zone 2 enter section [202] etc.
Default
ON
I____I
OFF
I____I
OFF
I____I
OFF
I____I
OFF
I____I
[994][,] Initiate Global Keypad Chime Broadcast
[995][,] Reset Keypad Options to Factory Default
[996][,] Label Default
[997] View Software Version
[998][,] Initiate Global Label Broadcast
[999][,] Reset Keypad EEPROM to Factory Defaults

Keypad Display Symbols

9
8
2 1 1
12 7 11 10
8
1 Fire – Indicates that there are fire alarms in memory.
2 Memory – Indicates that there are alarms in memory.
3 Ready Light (green) – If the Ready light is on, the system is ready for arming.
4 Armed Light (red) – If the Armed light is on, the system has been armed successfully.
5 System Trouble – Indicates that a system trouble is active.
6 AC – Indicates that AC is present at the main panel.
7 Program – Indicates that the system is in Installer's Programming, or the keypad is busy.
For Partition 5 Command O/P 1 to 4 enter [136] to [139]
For Partition 6 Command O/P 1 to 4 enter [140] to [143]
For Partition 7 Command O/P 1 to 4 enter [144] to [147]
For Partition 8 Command O/P 1 to 4 enter [148] to [151]
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
Option ON
1 6 Beeps
2 "Bing-Bing" Sound
3 "Ding-Dong" Sound
4 Alarm Tone
5-8 For Future Use
2
3
4
5
6
7
Label
OFF
Disabled
Disabled
Disabled
Disabled
8 Bypass – Indicates that there are zones automatically or manually bypassed.
9 For Future Use
10 Arm Mode – Indicates the mode the panel is armed in.
Stay – Indicates that the panel is armed in the Stay Mode. It will turn on at the beginning of the Exit
Delay
Away – Indicates that the panel is armed in the Away Mode. It will turn on at the beginning of the
Exit Delay
11 Chime – This icon turns on when Door Chime is enabled on the system and will turn off when Door
Chime is disabled.
12 Open – When zones are opened, this icon will turn on, and 7 segment displays 1 and 2 will scroll
through the open zones.