Removing An Adapter - IBM 7979B1U User Manual

Removing an adapter

To remove an adapter, complete the following steps.
Low-profile PCI Express
adapter
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices and disconnect all power cords and
3. Pull the server out of the rack; then, remove the cover (see "Removing the
4. If the adapter is on the riser card, remove the riser-card assembly from the
42
System x3650 Type 7979: User's Guide
Adapter
Expansion slot 2
Expansion
slot cover
on page 28.
external cables (see "Turning off the server" on page 13).
Attention: In a dc power environment, only trained service personnel other
than IBM service technicians are authorized to connect or disconnect power to
the dc power supply. See the documentation that comes with each dc power
supply.
cover" on page 31).
server (see "Removing the riser-card assembly" on page 32).
Expansion
slot covers
Riser-card
assembly
Expansion
slot 1
Adapter