Using The Configuration/Setup Utility Program; Starting The Configuration/Setup Utility Program; Configuration/Setup Utility Menu Choices - IBM 7979B1U User Manual

Using the Configuration/Setup Utility program

Use the Configuration/Setup Utility program to perform the following tasks:
v View configuration information
v View and change assignments for devices and I/O ports
v Set the date and time
v Set and change passwords
v Set and change the startup characteristics of the server and the order of startup
v Set and change settings for advanced hardware features
v View and clear the error and event logs
v Resolve configuration conflicts

Starting the Configuration/Setup Utility program

To start the Configuration/Setup Utility program, complete the following steps:
1. Turn on the server.
2. When the prompt Press F1 for Configuration/Setup appears, press F1. If you
3. Select the settings to view or change.

Configuration/Setup Utility menu choices

The following choices are on the Configuration/Setup Utility main menu. Depending
on the version of the BIOS code, some menu choices might differ slightly from
these descriptions.
v System Summary
v System Information
86
System x3650 Type 7979: User's Guide
devices (startup-drive sequence)
have set both a power-on password and an administrator password, you must
type the administrator password to access the full Configuration/Setup Utility
menu. If you do not type the administrator password, a limited
Configuration/Setup Utility menu is available.
Select this choice to view configuration information, including the ID, speed, and
cache size of the microprocessors, a USB device summary, and the amount of
installed memory. When you make configuration changes through other options
in the Configuration/Setup Utility program, the changes are reflected in the
system summary; you cannot change settings directly in the system summary.
This choice is on the full and limited Configuration/Setup Utility menu.
Select this choice to view information about the server. When you make changes
through other options in the Configuration/Setup Utility program, some of those
changes are reflected in the system information; you cannot change settings
directly in the system information.
This choice is on the full Configuration/Setup Utility menu only.
– Product Data
Select this choice to view the machine type and model of the server, the serial
number, the system UUID, the system board identifier, the revision level or
issue date of the BIOS code and diagnostics code, and the version, date, and
build level of ROM code for the Remote Supervisor Adapter II SlimLine, if one
is installed.
– System card data
Select this choice to view the identity of the system board, power supplies,
DASD backplane, and power backplane.