Fan bracket
To remove the fan-bracket assembly, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices, and disconnect the power cords and
3. Remove the cover (see "Removing the cover" on page 31).
4. Place your thumbs on the metal tabs of the fan-bracket-assembly levers and
5. Grasp the levers and lift the fan-bracket assembly out of the server.
78
System x3650 Type 7979: User's Guide
Lever
on page 28.
all external cables.
Attention:
In a dc power environment, only trained service personnel other
than IBM service technicians are authorized to connect or disconnect power to
the dc power supply. See the documentation that comes with each dc power
supply.
pinch the tab and blue release latch together; then, raise the levers, raising the
fan-bracket assembly.
Fan-bracket
release latches
Lever