Compaq ProLiant 8000 Maintenance And Service Manual page 176

The System Configuration Utility settings should resemble those in Table 3-20 when you enable
ASR to restart into the operating system.
OS Restart SCU Setting for ASR-2
Option
Serial interface
Dial-in status
Dial-out status
Dial-out string
Network status
Network protocol
Network controller
Network host name
Network card slot
Network frame type
Network IP address
Network IP net mask
Network IP router address
ASR-2 Security
The standard Compaq password features function differently during ASR-2 than during a
typical system startup. During ASR-2, the system does not prompt for the power-on password.
This allows ASR-2 to restart the operating system or Compaq Utilities without user
intervention.
To maintain system security, set the server to boot in Network Server Mode (an option in the
System Configuration Utility). This option ensures that the server keyboard is locked until you
enter the keyboard password.
Select an administrator password (an option in the System Configuration Utility). During
attended ASR-2 (local or remote), you must enter this administrator password before any
modifications can be made to the server configuration.
Table 3-20
Setting
COM1
Disabled
Disabled
555-1234
Disabled
IPX
Compaq
CPQHOU
Slot #
ETHERNET_II
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
Diagnostics and Troubleshooting 3-79