Problems With Scanning - Canon FS 3.6 User Manual

Can't start CanoCraft FS from within another application
Cause:
Solution:
[CanoCraft FS or CanoCraft FS Copy is running. Close it and run this
program] message displays
Cause1:
Solution1: Close CanoCraft FS Copy before starting CanoCraft FS.
Cause2:
Solution2: Close CanoCraft FS before starting CanoCraft FS Copy.

Problems with Scanning

[Initializing film scanner. Please remove film] message displays
Cause 1:
Solution:
Cause 2:
Solution:
Image is vertically or horizontally inverted
Cause:
Solution 1: Insert the film with the correct orientation. (Getting Started
Solution 2: Click the Rotate/Flip button and change the orientation of
Brightness of preview image and scanned image are different
Cause:
Solution:
Scanner settings not correctly set in the application program
Correct the scanner settings in the application program. See
the manual for the application program for instructions.
You attempted to start CanoCraft FS when CanoCraft FS
Copy was already running
You attempted to start CanoCraft FS Copy when CanoCraft
FS was already running
Scanner power turned on with a film already inserted
Remove the film and follow the instructions on the screen.
Set period of time passed without scanner being operated
after power turned on
Remove film and follow the instructions on the screen.
Film is inserted upside down or backwards
Guide)
the image. (p. 39)
Display brightness settings are incorrect
Adjust display brightness settings. (Display manual)
Appendices
114