Split-Screen Display With Non-Network Sources - Canon Networked Multi-Projection Set Up And Instructions Manual

Split-Screen Display With Non-Network Sources

Split-screen display combining images transferred over a network with other input
signals (HDMI, digital or analog computer, or component signals) is supported.
Network input cannot be combined with USB input for split-screen display.
When a session includes projectors or computers running NMPJ V1.0, nothing is
projected on the screen for the network source, because no signal is received.
Network sources can be used for both sides of split-screen display. For details on
split-screen display, refer to the projector user's manual.
Split-screen display is only available when the screen is evenly divided on the left
and right, not with 70:30 or 30:70 layouts.
Even when only one projector is used for split-screen display with images
transferred from this software, image quality is automatically set to [Low] (to
maintain transfer speed) and cannot be changed.
However, the image quality setting itself, on the setting screen, is not changed. The
original image quality is restored once you finish with split-screen display.
69