Table of Contents
Advertisement
6.
Select R A I D
R A I D
R A I D
R A I D from the L o g i c a l D r i v e
R A I D
7.
Select RAID 10 from the menu, then press <Enter>.
You need at least four identical hard disk drives when creating a RAID 10 set.
8.
Select S t r i p e S i z e
S t r i p e S i z e
S t r i p e S i z e
S t r i p e S i z e from the L o g i c a l D r i v e
S t r i p e S i z e
<Enter>.
9.
Key-in the stripe size, then press <Enter>.
For server systems, we recommend that you use a lower array block size.
For multimedia computer systems used mainly for audio and video editing,
we recommend a higher array block size for optimum performance.
A S U S T S 3 0 0 - E 3
A S U S T S 3 0 0 - E 3
A S U S T S 3 0 0 - E 3
A S U S T S 3 0 0 - E 3
A S U S T S 3 0 0 - E 3
L o g i c a l D r i v e menu, then press <Enter>.
L o g i c a l D r i v e
L o g i c a l D r i v e
L o g i c a l D r i v e
L o g i c a l D r i v e
L o g i c a l D r i v e menu, then press
L o g i c a l D r i v e
L o g i c a l D r i v e
6 - 1 3
6 - 1 3
6 - 1 3
6 - 1 3
6 - 1 3
Advertisement
Table of Contents
