2.10.7 Power supply unit
2.10.7
2.10.7
Power supply unit
Power supply unit
Power supply unit
2.10.7
2.10.7
Power supply unit
Refer to this section when removing or installing a power supply unit to the
barebone system.
You MUST disconnect all power cable plugs from the motherboard and
other installed devices before removing the power supply unit.
The picture below shows the motherboard and device connectors where
the power plugs are connected. Refer to the Appendix at the end of this
document for the power supply specifications.
3 3 3 3 3
4 4 4 4 4
2 2 2 2 2
1 1 1 1 1
5 5 5 5 5
Model PA4
Model PA4
Model PA4
Model PA4
Model PA4
24-pin ATX (motherboard power
1.
connector)
2.
4-pin +12V (motherboard
power connector, hidden behind
the cables)
3.
4-pin plug (optical drive)
2 x 4-pin plugs (SATA
4.
backplane)
4-pinplug (floppy disk drive,
5.
hidden behind the backplane)
Make sure to unplug A L L
removing the power supply unit.
A S U S T S 3 0 0 - E 3
A S U S T S 3 0 0 - E 3
A S U S T S 3 0 0 - E 3
A S U S T S 3 0 0 - E 3
A S U S T S 3 0 0 - E 3
1 1 1 1 1
24-pin ATX (motherboard
1.
power connector)
2.
4-pin +12V (motherboard
power connector, hidden
behind the cables)
3.
4-pin plug (optical drive)
2 x 4-pin plugs (SCSI
4.
backplane)
4-pinplug (floppy disk drive,
5.
hidden behind the backplane)
A L L
A L L
A L L power cables from the system devices before
A L L
3 3 3 3 3
4 4 4 4 4
2 2 2 2 2
5 5 5 5 5
Model PS4
Model PS4
Model PS4
Model PS4
Model PS4
2 - 4 3
2 - 4 3
2 - 4 3
2 - 4 3
2 - 4 3