Asus TS300-E3 PS4 User Manual page 36

3. Make sure that the drive and
bay hole align as shown. When
in place, the drive protrudes
about an inch from the front
panel.
4. Secure the drive with a screw.
5. Connect the IDE cable to the IDE
connector on the back of the
drive.
6. Connect a 4-pin plug from the
power supply to the power
connector on the back of the
drive.
2 - 1 6 2 - 1 6 2 - 1 6 2 - 1 6 2 - 1 6
I D E c a b l e I D E c a b l e I D E c a b l e I D E c a b l e I D E c a b l e
P o w e r p l u g P o w e r p l u g P o w e r p l u g P o w e r p l u g P o w e r p l u g
C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p