Quick Setup; Insert The Batteries - Dish Network 159263 User Manual

1
Install the Key Correctly
Note: If you will be using the blue TV2 key that comes
already installed in your remote, skip this step and
proceed with the next step
1
Pull the
remote
battery
cover off.
3
2

Insert the Batteries

1

Quick Setup

Insert the
key face up
and slide
into place.
Insert 4 AAA
batteries,
making sure
to match the
plus (+) ends
with the plus
markings on
the battery
case.
C-2
(Insert the Batteries).
2
Separate the key
from the remote
by inserting
your thumbnail
or a coin in the
crease. Remove
the key by
grasping at
the bottom.
4
Change the
2
UHF/IR
SWITCH
to IR
Replace
the
remote
battery
cover.