Remote Button Shortcuts - Dish Network 176842 User Manual

1
Make sure the UHF-2G remote antenna is connected to the correct
input on the receiver's back panel and is not touching anything
else. It should be tightened only by hand. Note: Remote antennas
used with other DISH Network satellite receivers and remotes
cannot be used with your ViP922 receiver or remote controls.
2
Try varying the tilt angle of the receiver's remote antenna. Locate
the antenna's tip away from any other electronic equipment or
metal surfaces, even if separated by wooden shelving.
3
Move the satellite receiver to a different location. For best results,
place the receiver on as high a surface as possible, above all other
equipment in your entertainment center.
4
Place the remote antenna away from other equipment by using the
optionally available special cable to connect it to the receiver.
5
Move any nearby antenna or radio equipment away from the
UHF-2G remote antenna. Do not place an over-the-air antenna,
WiFi, Bluetooth, or Zigbee devices on or near the remote antenna.
R B
EMOTE
In addition to their normal functions, some buttons on your remote
control have special "shortcut" functions when you are navigating the
on-screen Electronic Program Guide (EPG), or inside a drop-down
menu of options or scrollable list of events displayed by your receiver.
DVR B
UTTONS
The following table lists some of these shortcuts for the black set of
buttons that normally control your DVR functions. Note that scheduled
updates to your receiver software may add to or modify these shortcuts.
REMOTE BUTTON
SKIP BACK
PLAY/PAUSE
SKIP FWD
FAST REVERSE
FAST FWD
10
S
UTTON HORTCUTS
IN GUIDE DISPLAY
Moves 3 Hours Back
Watch highlighted show
Moves 3 Hours Ahead
24 Hours Back
24 Hours Ahead
SCROLLS IN LISTS
By 1 Screen Upward
No
By 1 Screen Downward
To beginning of list
To end of list