Remote Operation In Sat/Tv/Dvd Modes - Dish Network 176842 User Manual

Instructions
8
Press and release the mode
button for the device you are
setting up (TV, DVD, or
AUX).
9 Press the POWER button.
If your equipment does not
turn off, then press and
release the SAT button to
switch modes, and try
entering the code again.
10 While still in the same
mode (TV, DVD, or AUX),
turn the equipment back on
and try some other buttons
to make sure they work.
11 If necessary, repeat these
instructions until you have
entered the best code for
controlling your device.
12 If other remote buttons
work to control your
equipment, you have
finished setting up this
device mode.
Additional Information
If you are setting up a TV, you
can remain in SAT mode and
press the TV POWER button in
step 9.
If the device code you entered
works, then your equipment
should turn off. Continue with
step 10.
Sometimes POWER works
when other buttons don't, and
more than one code may work
to turn equipment on or off.
Choose the best device code.
If you do not want to enter
codes manually, use the Look
Up option described in Setting
Up the Remote to Work With
Your Equipment on page 3. In
addition to looking up
equipment by brand name to
find corresponding device
codes, you can also enter a
device's model name/number
using an on-screen keyboard to
search for it in the database.
You can program the remote to
control your TV in TV mode, a
disc player in DVD mode, and
an audio amplifier or A/V
receiver in AUX mode. Repeat
these instructions, as needed for
each mode you want to use.
7