Restoring Factory Default Settings - Axis SHDUG Manual

34

Restoring Factory Default Settings

AXIS StorPoint NAS 100 User's Guide
Restoring Factory Default Settings
To restore default settings using the Push button.
1. Press and hold the Push button.
2. Start the StorPoint NAS.
3. Wait until the Status indicator flashes yellow (one flash/second).
4. Let go of the button at least two seconds.
5. Press and hold the Push button again until the Status indicator shows a steady yellow light.
This may take 5-6 seconds. .
6. Restart the StorPoint NAS. The StorPoint NAS is now reset to factory default settings.