Axis SHDUG Manual page 9

AXIS StorPoint NAS 100 User's Guide
AXIS IP Installer
The AXIS Installer is an application that allows you to
assign IP addresses to your StorPoint NAS, find IP
addresses of already installed hard disk servers and access
the StorPoint NAS internal Web pages for easy
configuration.
By assigning IP addresses to your StorPoint NAS, you can
easily manage and configure it from any standard Web
browser. The Web browser can be launched from the AXIS
IP Installer application.
Installing AXIS IP Installer
The required utility software is available on the AXIS Online CD. It can also be downloaded from
the Axis Web Site at http://www.axis.com.
Follow these steps:
1. Locate the setup file,
2. Follow the instructions on the screen.
When finished, AXIS IP Installer will be available from your Start menu. To run the program,
select Programs | Axis Communications | Axis IP Installer.
For help in how to use the AXIS IP Installer, click the Help button from the application to start the
AXIS IP Installer help file.
ARP in Windows 95/98 and Windows NT
Type the following commands from a DOS window:
Syntax Windows 95
arp -s <IP address> <Ethernet address> <my PC IP address>,
<my PC IP address>,
ping <IP address>
Example Windows 95
arp -s 192.16.253.80 00-40-8c-10-00-86 171.16.6.40
ping 192.16.253.80
Syntax Windows 98 and Windows NT
arp -s <IP address> <Ethernet address>
ping <IP address>
, and choose the Run option from the Windows Start menu.
Setup.exe
is the IP address of your Windows 95 PC.
Basic Installation
where
9