28
Accessing the Hard Disks
5. In bindary mode, you will be prompted to enter
your user name and password, unless you are
already logged in.
6. Select the StorPoint NAS resource you want to
map.
7. Select a drive letter and click OK.
OS/2 Clients
1. Open an OS/2 window.
2. At the OS/2 prompt, type:
net use <drive letter>: \\AXIS<nnnnnn>\<folder>
where
<nnnnnn>
any shared StorPoint NAS folder.
UNIX (NFS) Clients
You will need root privileges to mount the StorPoint NAS. Follow these steps:
1. Create a directory for the StorPoint NAS.
mkdir <directory>
Example:
mkdir /storpoint
2. Mount the StorPoint NAS.
mount <IP address>:/ <directory>
Example:
mount 192.16.253.80:/ /storpoint
are the six last digits of your StorPoint NAS serial number and
AXIS StorPoint NAS 100 User's Guide
is
<folder>