Error Checking - Axis SHDUG Manual

AXIS StorPoint NAS 100 User's Guide

Error Checking

In case the StorPoint NAS has not been properly shut down, for example during a write operation,
the hard disk file structure may get damaged.
To find out if there are any errors on the hard disk it is possible to perform an Error-checking. This
will check the hard disk for errors and if any are found, also repair the hard disk.
To check for errors on the hard disk, follow these steps:
1. Start the Web browser.
2. Enter the name or IP address of the StorPoint NAS in the location/address field.
3. Click admin. You will be prompted for User Name and Password. By default this is set to
and respectively.
pass
4. Click the icon that corresponds to the hard disk you want to check.
5. Click Error-checking.
6. Select the Automatically fix file system errors checkbox to fix the errors
automatically.
7. Click Start to start checking for errors.
Note:
If you do not select the Automatically fix file system errors checkbox, only a hard disk check
will be performed. All results can be viewed in the Event Log.
Error Checking
root
31