General - Axis CAMERA STATION 1.1 User Manual

General

Reset to no live images
after (hours)
Show event log
Default save events in
days
Enable password
protection
Server IP address
AXIS Camera Station User's Manual
If there is no user activity for the specified number of hours, the view reverts to
showing no live images.
Select if you want the event log to appear in the Main window. See Event Log,
on page 15 for more information on the event log.
Specify the number of days to save images (and alarm logs) in the database.
The server frequently monitors the amount of hard disk space available and, if
required, removes old events to free up hard disk space. This setting determines
the value of the 'Default' option on the Recordings tab.
Camera surveillance and saving recorded images may be prohibited by
legislation that varies from country to country. Check the laws in your local
region regarding the number of days recorded public images may be saved.
If enabled, the Administration options, i.e. the different tabs available when
you click File | Administration, are password protected. Users must also be
defined as users in Windows own user database. The Users tab in AXIS Camera
Station allows you to specify the cameras available to each user.
Warning!
Before enabling password protection, ensure that at least one user is defined
as an Administrator under the Users tab, otherwise it will not be possible to
access the Administration pages again!
This field must contain the IP address of the PC on which AXIS Camera Station
is installed.
• If the PC is available over a WAN (e.g. the Internet) specify the WAN IP
address.
• Otherwise enter the LAN IP address of the PC.
AXIS Camera Station Administration
37