Axis CAMERA STATION 1.1 User Manual page 22

AXIS Camera Station Administration
Enable Audio
FTP
Example: Setting up a camera to send recorded images to an FTP directory
22
Check this if you want sound when the camera has a microphone built-in or
attached. This enables full duplex live audio between camera/microphone and
user. Note that the recordings do not contain any audio.
AXIS Camera Station usually gets images from the camera via HTTP, but it is
also possible to record images via FTP, whereby the camera first pushes the
images to an FTP server and ACS retrieves the images from the FTP server. This
may be done to save on network bandwidth.
Note:
Live view is not possible from AXIS Camera Station over ftp, only recorded
images can be sent to an FTP server.
The camera contains the settings that specify when to send images over ftp,
see your Axis camera documentation for details. The FTP server can be installed
on the same server as AXIS Camera Station or on another server within the
same Windows network. The camera must be set up to send a file via FTP on I/O
activity or motion.
Note:
IIS has an integrated FTP server that needs to be enabled manually. See your
Windows documentation for instructions.
An FTP directory must first be created within your Windows network, either on
the same server PC as AXIS Camera Station or on another computer.
1. The Axis camera must first be set up to send recorded images to the ftp
server.
Select FTP upload
IP address of FTP
server
Path to FTP directory
where images will
be stored.
Example: AXIS network camera web configuration pages
AXIS Camera Station User's Manual