Axis 27979R1 User Manual page 15

Notes:
Registering and
Resolving
Host Names
WINS Host Name
Rules
DDNS Host Name
Rules
AXIS 5550 User's Manual
Windows
ARP/Ping
UNIX/Mac OS X
AXIS AddPrinter Windows 2000, XP,
Wizard 2003
AXIS ThinWizard Windows 2000/XP
• The ability to set the IP address with ARP and PING will only be enabled the first 10
minutes after restarting the print server.
• Refer to "Setting Parameters" on page 43 for information about setting the IP address in
the Macintosh environment.
In order to register the host name of the AXIS 5550 in networks with
dynamic IP address settings, WINS (Windows Internet Name Service) and
DDNS (Dynamic Domain Name System) are supported. It is recommended
that at least one of these methods should be used if you are setting the IP
address of the print server using DHCP.
The host name of the AXIS 5550 is specified by the PS_NAME. parameter.
Refer to the "The Parameter List" on page 137.
WINS only supports 15 character long host names. If your host name is
longer than 15 characters, the AXIS 5550 truncates the host name to 15
characters when registering with a WINS server. You can view the AXIS
5550 host name that is registered at a WINS server in the print server's
Web interface. Refer to "Management and Configuration" on page 86.
DDNS supports 47 character long host names and can only consist of the
characters 'A-Z', 'a-z', '0-9' and '-'. If your host name consists of any
other characters, they are converted to '-' when registering with a DDNS
server. You can view which host name that is registered at a DDNS server
in the print server's Web interface. Refer to "Management and
Configuration" on page 86.
If the host name matches another entry in the DDNS data base, the print
Requires the IP address for each
device to be downloaded
individually. Cannot be used
over routers.
You must define the Default
Router and Subnet Mask. Log
in to the print server's Web
pages and select Admin |
Network Settings | Detailed
View | TCP/IP Network |
Default Router and Subnet
Mask. DHCP, Auto-IP, BOOTP
and RARP must first be set to
No
Axis software that allows you to
find print servers in your net-
work and assign an IP address to
them.
Axis software that assists in set-
ting the IP address of multiple
print servers simultaneously.
This software is recommended
for large organizations and ener-
prise networks.
Basic Installation
"Set the IP Address us-
ing ARP in Windows
98/NT/ Me/2000/XP" on
page 19
"Set the IP Address us-
ing ARP in UNIX/Linux
and Mac OS X" on page
19
"Adding Printers in Win-
dows 2000 / XP / 2003
using AXIS AddPrinter
Wizard" on page 23
"Using AXIS ThinWizard
for Print Server Man-
agement" on page 90
15