Axis 27979R1 User Manual page 48

Adding Printers in NetWare
48
9. You will find the print server in the next window with the printer attached
on the connected port. Depending on the transport protocol you used when
you start the installation, the print server should appear as following:
• TCP/IP Network protocol:
IP Address and Port, e.g: 192.168.70.243 and LPT1
Only the ports with a connected printer show up in this window. If
the printer is not in the displayed print list, click Manually specify
the print server and do the following: Enter the print server's IP
address in the IP Address field and choose a port in the Print Server
Port field:
e.g., 192.168.70.243 and LPT1
The port numbers are USB1 or LPT1; "other/unknown" denotes the
USB1 port.
Ports available
AXIS 5550
IPX Network protocol:
All the available ports will be presented, regardless if the printers are
or not connected to those ports, e.g.
AXIS5FF66A_P1 corresponds to the LPT1 port, and
AXIS5FF66A_P2 corresponds to the USB1 port.
The IPX Addresses for the above printers will appear as:
<IPX External Network Number>:<Print server's HW
USB port
other/unknown
Parallel port
parallel
AXIS 5550 User's Manual