Axis 27979R1 User Manual page 87

Admin
Note:
Accessing the Web
Pages
Note:
AXIS 5550 User's Manual
When in Admin mode, you have access to all the print server's parameters
and you can change them to your liking. This mode is intended for
network administrators and can be password protected to prevent
unauthorized changing of the print server parameters.
To protect the Admin pages from unauthorized use, it is highly recommended that you change
the default password.
This is done from the Admin | General Settings | General tab. Enter the password in the Root
Password field.
Follow the steps below to access the internal Web pages of the Axis
Network Print Server:
1. Enter the print server's IP address (or host name) in the Location/Address
field of your Web browser. Press Enter
2. The Printer Overview page will appear. Click Admin to access the
Administration Web pages.
• You can address the print server's Web interface via https:// To do this you must enable
the SSL/TLS protocols in the Web interface: Admin | Network Settings | Detailed View
| TCP/IP Network and set the HTTPS Enabled parameter to Yes (you must have a valid
certificate loaded). If you do not have a valid certificate loaded, select Admin | Security
Settings and click Create.
3. If you have changed the User/Password combination, you will be prompted
for them. Click OK.
Management and Configuration
87