Tcp Ports Opened For Raw Printing; Snmp Device Index - Axis 27979R1 User Manual

TCP Ports Opened for Raw Printing

AXIS 5550
Note:

SNMP Device Index

Enable SNMP Status
Example
AXIS 5550 User's Manual
Port Number Port Via Logical Printer
9100 LPT1 —
9101 USB1 —
9900 LPT1 —
9902 USB1 —
9100 LPT1 —
9101 USB1 —
The TCP port numbers entered in RTEL_PRx. will override the settings in
the two tables above.
When using the TCP/IP protocol (and if the printer driver permits), the
print server can use SNMP Status to find out if the printer is ready to
accept a new job.
By default, Windows uses the value "1" when addressing an SNMP
device, which is correct for single port print servers. For a multiport print
server, obtain the SNMP Device Index from the table below.
Print Server LPR Queue Name
Single Port:
Parallel LPT1
Single Port:
USB USB1
Dual Port:
Parallel LPT1
USB USB1
Dual Port:
Parallel LPT1
Parallel LPT2
Three Port:
Parallel LPT1
Parallel LPT2
Serial COM1
SNMP Status is enabled through Windows' printer port settings.
You have a three port print server and want to enable SNMP Status for
LPT2. The table above tells you to set the SNMP Device Index to 3.
Using Windows XP as an example:
Condition
DEFAULT_RAW_TCP. set to 9100
AXIS_PRINT_SYSTEM. Enabled
NDPS. Enabled
Raw Port Number SNMP Device Index
9100 1
9100 1
9100 1
9101 2
9100 1
9101 2
9100 1
9101 3
9102 2
The Parameter List
149