AXIS Camera Station Web Application
An Internet Explorer Web browser can be used on client workstations to view live video, recordings and I/O status.
To enable Live View, a set of IP addresses and port numbers must be opened in your firewall; there must be an open port
for each camera and one port for AXIS Camera Station. See Network Configuration, on page 27. Simply viewing recorded
events/images does not require the firewall configurations.
Enable Web Access
If you want to allow clients access to AXIS Camera Station Web,
proceed with these steps.
1. Under Options > General Settings > General, check
Enable Web access under Camera Station Web
access.
2. In the Web server IP address field, make sure the
correct IP address that Clients will use to connect to
the server is entered. Make a note of the IP address.
• For internal Web access from a LAN, enter the
LAN IP address of the dedicated PC.
• For external Web access from a WAN, enter the
WAN IP address.
3. The installation of the Web interface will start.
When the Web interface is installed on the server,
Web sharing is enabled
Notes:
• In Windows XP Professional, a maximum of five
users can access to the Web interface simultaneously. This limitation is not present in other operating
systems.
• To be able to log into AXIS Camera Station from a Web browser, the user must be created in the
Windows user database. See How to set up Users, on page 18.
Access AXIS Camera Station Web from a client PC
1. Open a Web browser on the client computer.
2. In the Address field, write http://server IP address/videoweb
Example: http://10.13.6.128/videoweb
3. The AXIS Camera Station Web interface will appear:
AXIS Camera Station - AXIS Camera Station Web Application
25