Chapter 11. Navigating With Your Voice - IBM VIAVOICE 10-PRO USB EDITION User Manual

Chapter 11. Navigating with your voice

You can navigate your desktop and programs with your voice. You can use
the mouse, keyboard and voice interchangeably. You should pause briefly
before and after each navigation command. The recognized commands appear
in VoiceCenter.
Generally, you can say the names that you see on menus, lists and buttons to
operate them. For example, say "Edit" to open the Edit menu. To see a list of
other commands that are available, say "What Can I Say for Active Program".
To say a command while dictating, pause briefly before the command, say the
command without pausing between command words, and then pause again
after the command. This way, ViaVoice can translate your speech into a
command.
Should you pause or hesitate, or say words that ViaVoice does not understand
as a command, the words will come back as dictated text. Delete the
unwanted text by saying "Scratch that", then say the command again. If
ViaVoice still does not recognize the command, say the command with the
Attention word, such as 'Computer' (for example, "Computer edit" to open
the Edit menu).
© Copyright IBM Corp. 1998, 2002
You can use voice commands to navigate the active program only when you
have installed ViaVoice on Windows 98 Second Edition, Windows Me, or
Windows XP Home and Professional Edition. If the Active Program
Command Set is available in ViaVoice Options, your operating system
supports voice navigation of the active program. If the command set is
grayed out, your operating system does not support voice navigation, but
you can use the mouse as you normally do, and you can still use the
commands in the other command sets.
Set the Attention word 'Computer' to 'required' in the Dictation tab in
ViaVoice Options when ViaVoice habitually misrecognizes your commands.
You can add multiple Attention Words from the Command Sets tab in
ViaVoice Options.
97