Installing The Viavoice Software - IBM VIAVOICE 10-PERSONAL EDITION User Manual

Installing the ViaVoice software

1. Insert the ViaVoice CD in your CD-ROM drive to start the installation
program. If it does not start automatically, do the following:
a. Click Start > Run from the Windows taskbar.
b. Type d:\setup (where d is your CD-ROM drive).
c. Click OK.
2. Follow the instructions on the screen.
During installation you will see the following windows. (This section does not
show all windows you will see.)
User Information—Type your name and company name, if appropriate. Click
Next when you have finished.
2
ViaVoice for Windows Personal Edition