ScanSoft OMNIPAGE 15 Manual page 82

guidance on microphone installation and handling. Go to the General
panel of the Options dialog box and select Enable voice assistant. The
voice recognition functions in the language set for the user interface in the
General panel of the Options dialog box. You may need to change this
temporarily if you have to use a different voice recognition language.
Voice activation is applied to two fields.
Workflow activation
To do this, the OmniPage Agent icon must be visible on the Windows
taskbar. Use the Start menu or the General panel of the Options dialog
box to place it there if it is not visible. When your ASR-1600 system is
operational, just say OmniPage workflows. This will activate the
shortcut menu. Speak the name of a workflow or say its number to have
the workflow start, invoking OmniPage Professional 15 if necessary. The
following commands are available:
OmniPage number <number>
OmniPage <workflow name>
OmniPage Batch Manager
OmniPage Exit
The last command removes the OmniPage Agent icon from the taskbar.
Use the Start menu or the General panel of the Options dialog box to
restore it.
Proofing
When you have OmniPage Professional 15 operational with the OCR
Proofreader dialog box open, the voice recognition can be used to accept a
suggestion from the list offered by the proofreader. The suggestions are
numbered. Say 'Number', then the suggestion number in the appropriate
language. For instance, say 'Number five'. Then suggestion five will be
placed in the text and you will move to the next suspect word. You can
also speak the word you want accepted. The buttons in the OCR
Proofreader dialog box can also be voice activated.
82 Chapter 6