Remote Configurations; Standard Configuration; Single Button Arm/Disarm Configuration - Directed Electronics K10 Installation Manual

remote configurations

The transmitters can be programmed with the standard or single button arm/disarm configurations by
using the Auto Learn functions in the Remote Coding.

standard configuration

A remote that uses the standard configuration operates similarly to many factory keyless entry remotes.
A standard configuration remote allows arming, disarming, and panic mode activation with separate
buttons. When programmed for standard configuration using the Channel 8 Auto-learn configuration,
the transmitter buttons are assigned to the following functions:
operates Arm only
operates Disarm only
operates Channel 2 and Silent Arm/Disarm
operates Panic only
and

single button arm/disarm configuration

When programmed for single button arm/disarm configuration using the Channel 7 Auto-learn con-
figuration, the remote buttons are assigned to the following functions:
operates Arm/Disarm/Panic
operates Channel 2 and Silent Arm/Disarm
and
14
operate Channel 3
operate Channel 3